asecos Catalogue 2013/14

Hazardous Material Workplace – EX-LINE

Hazardous Material Workplace – EX-LINE

EN 14175-3 (5.4.4.)

90cm

120 cm

180 cm

75 cm

Hazardous material workplaces model range EX-LINE with fresh air curtain

Safe capturing of hazardous materials in potentially explosive areas Zone 1 • required occupational exposure limits are maintained • testing of the air equipment according to EN 14175 part 3 (5.4.4) • maximum user safety • robust construction made of chemically resistant, anodised aluminium profiles • transparent side panes made from 5 mm TSG (tempered safety glass) • highly effective capturing of hazardous materials inside the workplace through special fresh air curtain technology • prepared for connection to the on-site exhaust air system • electrical equipment approved in accordance with RL94/9/EG For regulation-compliant usage in potentially explosive areas Zone 1 • workplace lighting: PTB 97 ATEX 2223, Zone 1 application area II 2 G, Ex deq II c T4 • supply air fan: PTB 03 ATEX 3004, Zone 1 application area II 2G, c T4 • switch amplifier: PTB 00 ATEX 2081 application area II (1) GD EEx ia II c • differential pressure switch: BVS 06 ATEX E141 x application area II 2 G Ex ia II B T4 • motor overload switch: PTB 01 ATEX 3307 application area II (2) GD Standard equipment • Control box including exhaust monitoring (to be installed outside of the potentially explosive area) • transparent side panes made from 5 mm TSG (tempered safety glass) • fold-away rear wall • melamine resin coated rear wall • working surface made of stainless steel (V2A/1.4301) as a welded sump • support frame for standing work

Fig. Included in scope of delivery:

Control box including exhaust monitoring, has to be installed outside of the potentially explosive area and connected by cable with the hazardous material workplace

Technical Data

Model

GAP.125.090.075.EX

GAP.125.120.075.EX

GAP.125.180.075.EX

Outer dimensions in mm height

1400 2265 2085

1400 2265 2085 1200

1400 2265 2085 1800

with support frame

Hazardous material workplace model GAP.125.180.075.EX with stainless steel working surface and support frame for standing work Order No. 14208

with support frame for sitting work

width depth

900 750

750

750

Inner dimensions in mm clear Height

1105

1105 1165

1105 1765

width depth

865 650

650

650

Usable working surface (mm) width

795 620 600

1095

1695

Views

depth

620 600

620 600

GAP -LINE

Further model sizes are available on request!

max. loading capacity (N/m 2 )

Width

750

Breite

Working height (mm) with support frame sitting work support frame standing work

250

720 900

720 900

720 900

150

Weight (kg) without support frame

96 19

105

123

Support frame total weight (kg)

25

38

115

130

161

260

1250

984 ca.

point load per stilt (N)

287 160 430 150

325 160 595 285

401 160 920

extraction air inlet (NW/mm)

Abluft 160 Extraction air Ø160

recommended exhaust air flow (m 3 /h)

(2255)

approx. pressure loss (Pa)

2x170

electrics (all models): energy-saving lamp, on-off switch, light switch, external monitoring electronics, supply air fan(s), motor protection switch for supply air fan (set on 1,0A), switch amplifier, power supply 230 V / 50 Hz, power input (W) 110

Erdung

Earthi

855

805

Supply air fan power input for supply air fain (W) 120

max. volume rate (m 3 /h) 150 max. pressure loss (Pa) 170

W x D x H (mm) 900 x 750 x 1400 1200 x 750 x 1400 1800 x 750 x 1400

Model

Order N o . 14164 n 14207 n 14208 n

max. revolutions (rpm) 2775-2855 approx. acoustic power level dB(A) 55

GAP.125.090.075.EX, Hazardous material workplace GAP.125.120.075.EX, Hazardous material workplace GAP.125.180.075.EX, Hazardous material workplace

Energy saving lamp input power (W) 18

303

302

Ready for dispatch within n 8–12 weeks