asecos Catalogue 2013/14

Hazardous Material Workplace – Weighing Workplaces

Hazardous Material Workplace – Weighing Workplaces

EN 14175-3 (5.4.4.)

Views GAP.125.120.075.WA

B- B

90cm

120 cm

B

75 cm

150

Testing of the air equipment according to EN 14175-3 (5.4.4)

750

Hazardous material workplace - Weighing workplace • robust construction made of chemically resistant, anodised aluminium profiles • weighed materials are not scattered by the fresh air curtain at the front • vibration-free facility for mounting the analytical scales on a granite block decoupled from the hazardous material workplace • highly effective capturing of hazardous materials inside the workplace through special fresh air curtain technology • prepared for connection to the on-site exhaust air system and for electrical supply (230V/50Hz) Standard equipment • support frame for standing work • workplace lighting • extraction air monitoring with visual and audible alarm • 2 sockets (230 V/50 Hz) • electrical connection socket (230 V) on the roof • empty embeded socket box including conduit for data cable • transparent side panes made from 5 mm TSG (tempered safety glass) • fold-away deflector • melamine resin coated rear wall

1200

A

A

1400

ca.1100

350

EP.E.10971 Gerätedose Socket box

200 70

2090

C

B

685

600

260

160 Abluft Extraction air Ø160

Technical Data

Weighing workplace model

GAP.125.090.075.WA

GAP.125.120.075.WA

Weighing Workplace Model GAP.125.120.075.WA with stainless steel working surface Order No. 27461 + 27463

Outer dimensions in mm height

1400 2085

1400 2085 1200

with support frame for sitting work

width depth

900 750

750

Inner dimensions in mm clear Height

1155

1155 1165

GAP -LINE

width depth

865 650

650

Usable working surface (mm) width

795 620 600

1095

depth

620 600

max. loading capacity (N/m 2 )

Working height (mm) mit support frame sitting work Weight (kg) without support frame

900

900

96 19

105

support frame total weight (kg)

25

115

130

point load per stilt (N)

287 160 431 150

325 160 595 285

extraction air inlet (NW/mm)

recommended exhaust air flow (m 3 /h)

approx. pressure loss (Pa)

pre-installed earthed sockets (pieces) empty embeded socket box (pieces)

2 1

2 1

W x D x H (mm) 900 x 750 x 1400 1200 x 750 x 1400

Model

Order N o . 27464 n 27461 n

lighting (W)

36

36

GAP.125.090.075.WA, Weighing Workplace GAP.125.120.075.WA, Weighing Workplace

Electrics (all models) Power supply 230 V, 50 Hz, energy-saving lamp, on-off switch, light switch, monitoring electronics, supply air fan, 2 or 4 earthed sockets 230 V, 50 Hz (depending on model width). The unit is protected with 5A fuse. All figures are approximate values

Accessories Working surface stainless steel with cut-out for GAP.125.090.075.WA Working surface stainless steel with cut-out for GAP.125.120.075.WA

400 x 400 400 x 400

27466 n 27463 n

305

304

Ready for dispatch within n 8–12 Weeks