asecos Catalogue 2013/14

Extraction Units

Extraction Module

Extraction module for technical ventilation of up to 4 safety storage cabinets

Extraction units - ready to plug-in, easy and quick installation

Extraction units for cabinets

Safe capturing of escaping vapours and gases at the point where they are released or produced

Safe capturing of escaping vapours and gases at the point where they are released or produced

• very low noise, ideal for direct installation at the workplace • with connection cable and power cord • connecting fitting 75 NW • imensions W x D x H (mm): 200 x 400 x 200 • ATEX complient: CE II 3/-G c T4

• suitable for 10 times air change • extraction air monitoring with integrated pressure leak detector • with wall console and installation material • connecting fitting 100/140 NW • ATEX complient: CE II 3/- Gc IIC T4 • housing made of sheet-steel plastic laminated • dimensions W x D x H (mm): approx. 600 x 300 x 600 • weight approx. 7 kg

Extraction unit without extraction air monitoring Order No. 14218 n

Extraction unit with extraction air monitoring Order No. 14220 n

Extraction unit with extraction air monitoring and potential-free alarm contact (without illustration) Order No. 16454 n

without extraction air monitoring • the green LED turns off in case of power breakdown

with extraction air monitoring • integrated pressure leak detector • the green LED turns off in case of failure and the red LED lights up voltage free switch contact • additionally available for units with extraction air monitoring for installation on a wall • incl. installation consoles, flexible hose, hose clips and installation material The extraction units for underbench cabinets were especially designed for the pressure conditions and volumetric flows of safety storage cabinets with a small internal volume. Dimensions W x D x H (mm) 200 × 400 × 200 Motor rating kW 0.03 Nominal voltage V 230 Frequency Hz 50 Input current A 0.3 Noise level dB (A) <50 Revolutions rpm 2450 Weight kg 7 max. length of the on-site exhaust air duct 15 m (incl. max. 2 pieces one-quarter tubing) Technical data all Modeles

Extraction unit for installation on a wall without extraction air monitoring Order No. 17178 n

Extraction unit for installation on a wall with extraction air monitoring Order No. 17177 n

Extraction unit for installation on a wall with extraction air monitoring and potential-free alarm contact (without illustration) Order No. 18568 n

Extraction units for underbench cabinets

Extraction unit for underbench cabinets for installation on a wall with extraction air monitoring and potential-free alarm contact Order No. 24732 n

Diagram extraction module

Technical data

Motor rating

kW 0.09

Nominal voltage V

230

Diagram extraction units

Frequency

Hz

50 0.6

Input current Noise level Revolutions

A

dB (A) 39 rpm 2850

Extraction unit for underbench cabinets for installation on a wall with extraction air monitoring Order No. 24315 n

Weight

kg

7

Pressure drop Pa

Extraction air amount m 3 /h

Pressure drop Pa

Extraction air amount m 3 /h

Article

Order No. 8678 n

Extraction module HF.EA.8678

279

278

Ready for dispatch within n 2 days

Ready for dispatch within n 2 days